InStar RIS
Referring Physician Portal

InStar RIS System Requirements

InStar will identify your requirements and upon request, will purchase all necessary server hardware and third party software. InStar recommends using Dell hardware for optimum compatibility. Listed below are system requirements and recommendations. Please call InStar’s sales department for more information:

Standard NON Fault Tolerant Network/Database Server

  • Single Processor - Intel Xeon 2.8 GHz
  • 2 GB DDR2 DIMMS
  • (2) 72GB 10K RPM Ultra 320 SCSI Hard Drive (no RAID)
  • Keyboard, Mouse
  • 48X CD ROM Drive
  • 15” Monitor
  • 56K PCI Internal Modem, V.92
  • Onboard NIC
  • Windows 2003 Server Operating System
  • 1400V Uninterruptible Power Supply

Optional Server Additions

  • Server Redundant Power Supply
  • RAID 5 Controller w/ 3 Drives (Redundant data storage)
  • AIT or DDS Tape Backup Unit (Data Backup, AIT or DDS dependent on HD size)
  • 1GB Ethernet Adapter w/ available Ethernet switch port (Heavy network traffic)
  • 48X IDE CD-RW/DVD ROM Drive (optional manual backup)
  • Additional Processor – Intel Xeon 2.4 GHz (Additional Users, HL7 interfaces, Web Client Users)

Server Software Requirements

  • Windows 2003 CALS
  • Microsoft SQL Server 2000 Server
  • SQL Server CALS
  • Microsoft Office 2003 Professional Edition
  • Veritas Backup Exec 9 for Windows Servers (or equivalent, required with tape backup units)
  • Veritas Backup Exec 9 Agent for SQL Server (or equivalent, required with tape backup units)
  • Active PDF Server (Required with Web Client Module)
  • Server-Based Anti-Virus Solution
  • To increase effectiveness, an additional Web Server will be required if utilizing the Web Client. The specs will not exceed those set out above.

Client Workstations (minimum requirements)

  • Intel Pentium IV, 2.4GHz Processor
  • 512 MB SDRAM
  • 64 MB Graphics Card
  • 17” Flat Screen Monitor
  • Keyboard, Microsoft Scroll Mouse
  • CD/DVD ROM Drive
  • 40 GB Hard Drive
  • 100MB Ethernet Network Adapter
  • Belkin 350V Home/Office UPS/Surge Protector

Workstation Software Requirements

  • Microsoft Windows XP Professional
  • Microsoft Office 2003 Standard Edition (Professional Edition required on all workstations with requirement of running management reports.)

Additional Network Requirements

  • Broadband Internet Access at 512Kbps Upstream and Downstream
  • Analog phone line @ server location w/DID #
  • VPN Capable Router (SonicWall, Symantec, Watchguard) (Recommend – Cisco 1700 w/ VPN IOS)
  • TCP/IP Network Protocol running on private segment (IP subnet provided by InStar)
  • Certified Switched Ethernet Backbone with 100Mb Ethernet Port available to each computer

Peripherals (Optional)

  • HP LaserJet 4300n Laser Printer (quantity as necessary per facility)
  • DYMO 330 Label Printer (quantity as necessary per facility) (Only supported label printer as integrated solution)
  • ScanShell 800N Card Scanner
  • GT 30000 Flatbed Scanner with Automatic Document Feeder


For more information,
please contact InStar:


InStar Systems
719.457.1955
info@instarsystems.com



Home | Products | Demos | Purchasing | Services | Tech Support | About InStar | Contact
© 2005 InStar Systems | Site Map | Privacy Policy | Legal & Other Matters